China reducing tee Manufacturers Factory Suppliers
-
Stainless Steel Reducing Tee Sch 160 for Hydraulic SystemsSeamless Reducing Tee: DN15-DN600 (½"-24")read more
Welded Reducing Tee: DN15-DN1200 (½"-48")
Supports SCH5S-XXS pressure ratings, ideal for oil/gas pipelines and cryogenic applications. -
Stainless Steel Concentric ReducerIncluding surface rolling, surface extrusion processing, etc. Suitable for polycarbonate, polypropylene and other materials. By cold pressing processing, the tensile strength and elastic modulus...read more
-
Duplex 2205 Stub End in Short PatternThis process leverages the plastic deformation property of metals. By applying pressure, it flattens microscopic convex peaks on the workpiece surface, thereby reducing surface roughness. High...read more
-
Heavy Wall 90° Long Radius Elbow ANSI B16.9Leveraging the plastic deformation ability of metals at ambient temperature, this process applies pressure to smooth out micro-level surface protrusions on workpieces, effectively lowering surface...read more
-
ASME B16.9 Stainless Steel Equal Tee Sch 40s for High-Pre...Seamless Equal Tee: DN15-DN600 (½"-24")read more
Welded Equal Tee: DN15-DN1200 (½"-48")
Supports SCH5S-XXS pressure ratings, ideal for oil/gas pipelines and cryogenic applications. -
Heavy Wall Eccentric Reducer in Duplex 2205Seamless Eccentric Reducer: DN15-DN600 (½"-24")read more
Welded Eccentric Reducer: DN15-DN1200 (½"-48")
Supports SCH5S-XXS pressure ratings, ideal for oil/gas pipelines and cryogenic... -
ASTM A403 WP316 Stainless Steel Concentric Reducer Sch 40...Seamless Concentric Reducer: DN15-DN600 (½"-24")read more
Welded Concentric Reducer: DN15-DN1200 (½"-48")
Supports SCH5S-XXS pressure ratings, ideal for oil/gas pipelines and cryogenic... -
180 Degree Long Radius ElbowTaking advantage of the characteristics of plastic deformation of metal, the microscopic convex peaks on the surface of the workpiece are flattened by applying pressure, thereby reducing the...read more
-
Eccentric ReducerTaking advantage of the characteristics of plastic deformation of metal, the microscopic convex peaks on the surface of the workpiece are flattened by applying pressure, thereby reducing the...read more
-
Stainless Steel Reducing TeeOpen holes at the part where the pipe blank stretches the branch pipe, then put the pipe blank into the molding mold, and stretch the branch pipe part through external force to make the metal flow...read more
-
Equal Cross FittingTaking advantage of the characteristics of plastic deformation of metal, the microscopic convex peaks on the surface of the workpiece are flattened by applying pressure, thereby reducing the...read more
-
Stainless Steel CollarSeamless collar rings are usually used with seamless steel pipes, and their relevant dimensions are related to the outer diameter of the seamless steel pipe with the corresponding nominal diameter.read more
168 rows · 10/3/2019 · A pipe tee can be manufactured in seamless, pipe welded or fabricated form. While seamless tee can be produced upto size of 24″, we can produce welded and...
93 rows · Pipe Tee Dimensions – Standard Reducing & Equal Tee Pipe Tee dimensions are covered in ASME B16.9. Refer to the table given below for the size 1/2″ to 48″. In piping, two types of tees are...
Yor-Lok Fittings for Stainless Steel Tubing. Use these fittings at pressures up to 9, 700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision...
DIMENSIONAL TOLERANCES REDUCING TEES ACCORDING TO ASME B16.9 Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8 10 to 18 20 to 24 26 to 30 32 to 48 ......
Buttweld Fittings 6-11 METLINE | Tel. 91-22-67496383 / 84 | Email: sales@metline.in | www.metline-pipefittings.in Reducing Tees - ANSI B16.9 Nominal Pipe Size Run OD Outlet OD...
Cleanout tee with plug (7) L (7) Pipe heat cable (7) Quarter bend (7) Donut (6) Eighth bend (6) Fastener (6) Fuel hose (6) Repair coupling (6) Vent elbow (6) Female adapter (5) Flare (5) Long...
